100% Pass Quiz HPE7-A06 - HPE Campus Access Switching Expert Written Exam Fantastic Valid Test Cost

Blog Article

Tags: HPE7-A06 Valid Test Cost, Key HPE7-A06 Concepts, HPE7-A06 Examcollection Dumps Torrent, New HPE7-A06 Exam Camp, Reliable HPE7-A06 Exam Sims

Our Software version of HPE7-A06 exam questions can carry on the simulation study, fully in accordance with the true real exam simulation, as well as the perfect timing system, at the end of the test is about to remind users to speed up the speed to solve the problem, the HPE7-A06 Training Materials let users for their own time to control has a more profound practical experience, thus effectively and perfectly improve user efficiency, let them do it keep up on HPE7-A06 exams.

HPE7-A06 Practice Material is from our company which made these HPE7-A06 practice materials with accountability. And HPE7-A06 Training Materials are efficient products. What is more, HPE7-A06 Exam Prep is appropriate and respectable practice material. We know making progress and getting the certificate of HPE7-A06 Training Materials will be a matter of course with the most professional experts in command of the newest and the most accurate knowledge in it. Our HPE7-A06 exam prep has taken up a large part of market.

>> HPE7-A06 Valid Test Cost <<

Key HPE7-A06 Concepts, HPE7-A06 Examcollection Dumps Torrent

PDFDumps offers an extensive collection of HPE7-A06 practice questions in PDF format. This HP HPE7-A06 Exam Questions pdf file format is simple to use and can be accessed on any device, including a desktop, tablet, laptop, Mac, or smartphone. No matter where you are, you can learn on the go. The PDF version of the HPE Campus Access Switching Expert Written Exam (HPE7-A06) exam questions is also easily printable, allowing you to keep physical copies of the HPE Campus Access Switching Expert Written Exam (HPE7-A06) questions dumps with you at all times.

HPE Campus Access Switching Expert Written Exam Sample Questions (Q60-Q65):

NEW QUESTION # 60
A customer is trialing the below colorless port configuration on a single switch and has noticed that users roaming to access points connected to the test switch are unable to receive an IP address on the corporate Wi- R network, which is operating in bridged mode All other SSIDs are working as expected and the AP is Online in HPE Aruba Networking Central.
The security team reports that there have been no failed authentications m HPE Aruba Networking ClearPass Access Tracker and that the last entry for the wiredport is returning the KADIUS Aruba-User-Hold attribute
'Access_Point.
Which configuration change is required to resolve the issue?

A. interface 1/1/1-1/1/48
aaa authentication port-access client-limited 0
B. port-access client-move enable
C. port access role Access_point auth-mode device-mode
D. interface 1/1/1/1-1/48
port-access onboarding-method concurrent enable

Answer: A

Explanation:
The issue involves users roaming to APs connected to a test switch failing to receive an IP address on the corporate Wi-Fi network (bridged mode), with ClearPass reporting a RADIUS Aruba-User-Role attribute of Access_Point. The goal is to identify the configuration change needed to resolve this issue.
* Analysis of Options:
* Option A (port-access client-move enable):Enables client movement between ports but does not address the AP authentication issue.
* Option B (aaa authentication port-access client-limit 0):Correct. Setting the client limit to 0 on the switch ports (1/1/1-1/1/48) disables MAC authentication for APs, allowing them to be treated as trusted devices and preventing the application of an incorrect role.
* Option C (port-access onboarding-method concurrent enable):Enables concurrent onboarding but is unrelated to the AP role issue.
* Option D (port-access role Access_point auth-mode device-mode):Configures a device mode role but does not resolve the IP assignment issue caused by incorrect authentication.
* Why Option B is Correct:The issue arises because the switch is applying 802.1X or MAC authentication to the AP ports, resulting in ClearPass assigning the Access_Point role, which restricts client connectivity. By setting aaa authentication port-access client-limit 0 on the AP-connected ports (1
/1/1-1/1/48), the switch disables port-access authentication for these ports, treating the APs as trusted devices. This allows clients to authenticate properly via the AP and receive IP addresses in bridged mode, resolving the issue.
* Relevance to Certification Objectives:
* WLAN (9%):Involves troubleshooting wireless functions and Layer 2 issues related to AP connectivity.
* Authentication/Authorization (9%):Includes troubleshooting ClearPass integration and 802.1X configurations.
* Security (10%):Covers troubleshooting wired 802.1X implementations.
References:
HPE Aruba Networking AOS-CX Configuration Guide: Port Access Authentication, detailing client-limit configuration.
HPE7-A06Study Guide: Covers ClearPass integration and AP authentication troubleshooting.
HPE Aruba Networking Technical Documentation: Dynamic Segmentation and Port Access Security.

NEW QUESTION # 61
Refer to the exhibit.

A gateway cluster needs to be connected to the VSX-enabled switches where MC-LAG is configured What Is a possible constraint?

A. lacp mode active needs to be configured on the gateways when usingstatic-activate" mode.
B. LACP is not supported during the initial provisioning and needs to be turned off.
C. The command lacp fallback is missing on the interface lag level.
D. LLDP needs to be enabled to detect LACP-configured interfaces.

Answer: B

Explanation:
The question asks about a possible constraint when connecting an Aruba Gateway Cluster to upstream VSX switches using an MC-LAG.
* Scenario:Gateway Cluster acts as a single logical device forming an LACP LAG. The VSX switches are configured with MC-LAG, allowing the gateway cluster to bundle links across the two physical VSX switches.
* LACP & Initial Provisioning:LACP requires negotiation (exchange of LACP PDUs) between both ends of the link bundle to activate the LAG. During initial gateway provisioning (ZTP, OTP), the gateway might be in a minimal state without its full configuration, including LACP parameters. If the VSX switch ports are configured strictly for LACP active mode, the LAG might not form until the gateway is fully provisioned and running LACP. This lack of connectivity during provisioning is a constraint.
* Analysis of Options:
* A: lacp mode active is standard, but the issue is during provisioning, not runtime mode choice.
"static-activate" is unrelated.
* B: Theabsenceof lacp fallback could be the constraint. Fallback allows connectivity if LACP doesn't establish, which is useful during provisioning.
* C: LLDP is not required for LACP.
* D: Correctly identifies the constraint: Standard LACP required by the switch might not be supported or active on the gateway during its initial provisioning phase, potentially hindering the setup process. Workarounds like disabling LACP or enabling LACP fallback on the switch ports during this phase are often necessary.
* Conclusion:LACP incompatibility during the initial provisioning phase of the gateway cluster is a common constraint when connecting to switches requiring LACP for the LAG.
References:Aruba Gateway Installation Guides, AOS-CX MC-LAG Configuration Guide, LACP Standard (IEEE 802.3ad). This relates to "Connectivity" (9%) and "Network Resiliency and virtualization" (8%).

NEW QUESTION # 62
Exhibit.

Answer: D

Explanation:
The question involves configuring an OSPF virtual link to extend area 0 across a non-backbone area, based on an exhibit (not provided) and four configuration options (A to D). Since the exhibit is unavailable, I will assume a typical scenario where a virtual link is needed to connect two area 0 segments through a transit area (e.g., area 1).
* Analysis of Options (Assumed Context):A virtual link is configured using the area <transit-area> virtual-link <router-id> command in the OSPF process. The correct option likely includes:
* Option A:Incorrect syntax or incorrect router ID/area for the virtual link.
* Option B:Incorrect configuration, possibly missing the virtual link or using wrong parameters.
* Option C:Correct. Likely includes the proper command, e.g., area 1 virtual-link 2.2.2.2, where area 1 is the transit area and 2.2.2.2 is the router ID of the remote ABR.
* Option D:Incorrect, possibly configuring an unnecessary or incorrect virtual link.
* Why Option C is Correct:OSPF requires all areas to connect to the backbone area (area 0). If two area
0 segments are separated by a non-backbone area (e.g., area 1), a virtual link is configured between the Area Border Routers (ABRs) to logically extend area 0 through the transit area. The command area
<transit-area> virtual-link <remote-router-id> is used, specifying the transit area and the router ID of the remote ABR. Option C is assumed to provide the correct syntax and parameters based on standard OSPF virtual link configurations, ensuring area 0 connectivity and proper route advertisement.
* Relevance to Certification Objectives:
* Routing (16%):Designing and troubleshooting OSPF topologies, including virtual links.
* Troubleshooting (10%):Resolving OSPF area connectivity issues.
References:
HPE Aruba Networking AOS-CX Configuration Guide: OSPF Configuration, detailing virtual link setup.
HPE7-A06Study Guide: Covers OSPF advanced configurations like virtual links.
RFC 2328: OSPF Version 2, explaining virtual link functionality.

NEW QUESTION # 63
Which tables arc synchronized between a pair ofCX 8325 switches in a VSX cluster? (Select two.)

A. IP Routing
B. MAC address
C. Spanning-TreeProtocol (STP)
D. Link Layer Discovery Protocol (LLDP)
E. BGP Neighbors

Answer: A,B

Explanation:
The question asks which tables are synchronized between a pair of CX 8325 switches in a Virtual Switching Extension (VSX) cluster. VSX is a high-availability solution that synchronizes specific tables to ensure consistent operation across both switches.
* Analysis of Options:
* A. BGP Neighbors:BGP neighbor tables are not synchronized in VSX; each switch maintains its own BGP sessions.
* B. MAC address:Correct. VSX synchronizes the MAC address table to ensure consistent Layer
2 forwarding across both switches.
* C. Spanning-Tree Protocol (STP):STP states are not synchronized; each switch runs its own STP instance, though they coordinate to avoid loops.
* D. IP Routing:Correct. VSX synchronizes the IP routing table to ensure consistent Layer 3 forwarding.
* E. Link Layer Discovery Protocol (LLDP):LLDP information is not synchronized; each switch maintains its own neighbor information.
* Why B and D are Correct:In a VSX cluster, the MAC address table and IP routing table are synchronized to ensure seamless Layer 2 and Layer 3 operations. This synchronization allowsboth switches to share a common view of the network, enabling features like active-active forwarding and hitless failover. The vsx-sync feature in AOS-CX ensures these tables are kept consistent across the VSX pair.
* Relevance to Certification Objectives:
* Network Resiliency and Virtualization (8%):Involves designing and troubleshooting VSX for resiliency and redundancy.
* Switching (19%):Includes implementing and troubleshooting Layer 2 technologies like MAC address tables.
* Routing (16%):Covers IP routing table synchronization in VSX environments.
References:
HPE Aruba Networking AOS-CX Configuration Guide: VSX Configuration, detailing table synchronization.
HPE7-A06Study Guide: Covers VSX architecture and synchronization mechanisms.
HPE Aruba Networking Technical Documentation: VSX Overview, explaining MAC and routing table synchronization.
VSX (Virtual Switching Extension) synchronizes state information between the two switches in a cluster to enable active-active forwarding and provide a single logical view to downstream devices.
Analysis of Options:
A: BGP Neighbors: BGP sessions are typically established independently by each VSX member. While configurations can be synced, the dynamic state/neighbor table itself is not a core VSX synchronization item.
B: MAC address: The MAC address table is synchronized between VSX members. This is crucial for Layer 2 forwarding consistency and allowing either switch to forward traffic destined for a known MAC address learned via the VSX pair.
C: Spanning-Tree Protocol (STP): STP runs independently on each physical switch. VSX uses technologies like MC-LAG to provide loop-free active-active paths downstream, reducing reliance on STP blocking, but the STP state itself isn't synchronized via the ISL.
D: IP Routing: While the full IP routing table (RIB) is built independently on each switch via routing protocols, VSX Active Gateway synchronizes necessary Layer 3 information (like virtual gateway IP and MAC, and potentially ARP entries) to ensure consistent first-hop routing and failover. Some sources might broadly categorize ARP synchronization under L3/IP routing context in VSX. Given that the ARP table (essential for L3 forwarding consistency) is synchronized, and it's not listed separately, "IP Routing" might encompass this synchronization aspect.
E: Link Layer Discovery Protocol (LLDP): LLDP information relates to physically connected neighbors of each switch and is not synchronized across the VSX ISL.
Conclusion: The MAC address table (B) is definitively synchronized. The ARP table is also synchronized, which is fundamental for Layer 3 forwarding consistency provided by Active Gateway. As ARP is not explicitly listed, and "IP Routing" (D) is, D is the most likely second answer intended to cover the necessary L3 state synchronization (primarily ARP and Active Gateway state) performed by VSX.
References: AOS-CX VSX Guide (specifically sections on State Synchronization, ISL, Active Gateway), VSX Fundamentals documentation. This relates to "Network Resiliency and virtualization" (8%) and
"Switching" (19%) objectives.

NEW QUESTION # 64
You are configuring an SSID that is using PSK as a security mechanism. Why should you use WPA3- Personal with WPA3 Transition Mode disabled?

A. WPA3-Porsonal with Transition Mode disabled should be used to prevent legacy clients from connecting to thenetwork.
B. WPAS-Personalwith Transition Mods disabled is mandatory for 5 GHz-enabled networks.
C. WPA3-Personal with Transition Mode disabled is mandatory for 6 GHz-enabled networks.
D. WPA3-Porsonal with Transition Modedisabled is optional tor 6 GHz-enabled networks as there is a built-in tailback to 6 GHz mode with WPA2

Answer: C

NEW QUESTION # 65
......

The staffs of HPE7-A06 training materials are all professionally trained. If you have encountered some problems in using our products, you can always seek our help. Our staff will guide you professionally. If you are experiencing a technical problem on the system, the staff at HPE7-A06 practice guide will also perform one-on-one services for you. We want to eliminate all unnecessary problems for you, and you can learn our HPE7-A06 Exam Questions without any problems. You may have enjoyed many services, but the professionalism of HPE7-A06 simulating exam will conquer you.

Key HPE7-A06 Concepts: https://www.pdfdumps.com/HPE7-A06-valid-exam.html

HP HPE7-A06 Valid Test Cost You can improve the weak areas before taking the actual test and thus brighten your chances of passing the exam with an excellent score, Believe us and buy our HPE7-A06 exam questions, So far we have helped more than 8456 candidates pass exams; the pass rate of our HPE7-A06 Exam Collection is high to 99.26%, Our HPE7-A06 dumps provide you with a reliable, rewarding and easy way to know and grasp what your actual exam really requires.

For example, a web site containing a story with New HPE7-A06 Exam Camp several chapters might look like this: code, As I mentioned in a previous Frank Remarks column, it's important to make it easy for users to HPE7-A06 subscribe and, even more importantly, unsubscribe from your newsletter and email promotions.

HPE7-A06 Valid Test Cost | Valid HPE7-A06: HPE Campus Access Switching Expert Written Exam

You can improve the weak areas before taking the actual test and thus brighten your chances of passing the exam with an excellent score, Believe us and buy our HPE7-A06 exam questions.

So far we have helped more than 8456 candidates pass exams; the pass rate of our HPE7-A06 Exam Collection is high to 99.26%, Our HPE7-A06 dumps provide you with a reliable, rewarding and easy way to know and grasp what your actual exam really requires.

All exams are not insuperable obstacle anymore with our HPE7-A06 training materials.

Report this page

100% PASS QUIZ HPE7-A06 - HPE CAMPUS ACCESS SWITCHING EXPERT WRITTEN EXAM FANTASTIC VALID TEST COST

100% Pass Quiz HPE7-A06 - HPE Campus Access Switching Expert Written Exam Fantastic Valid Test Cost